Kranzle 2+2, Operating Manual

Page: 4 / 20

4
Assembly of side brushes and push handle
Now press the safety caps from above,making sure
that they are attached to the correct sides (engraved
right and left).
Loosen the four plastic screws (4) on the
underside of the dust spoiler (3) and place
the screws with the plain washer (5) on the
ground.
Press the spoiler from the top onto the
housing. Now turn the screws with the plain
washer from below through the holes in the
housing into the spoiler.Now tighten the
screws.
Fix the push bar into the work position in
hole (A) using the star screws provided (a).
First place washer no. 72 on side brush no. 74 above the ball bearing and
place both on bearing bolt A. Tighten the screw with safety washers no. 76
and no. 77 into the bolt.
Fold back the handle on the machine. Now put the
sweeper upside down on the ground and, remove
the screw from the brass axle of the inlet brush.