WP-789T
Quick Start
P/N:
2 9 0 0 - 3 0 1 0 9 1 QS
Rev: 2
Scan for full manual
WP-789T Quick Start Guide
This guide helps you install and use your
WP-789T
for the first time.
Go to
www.kramerav.com/downloads/WP-789T
to download the latest user manual and check if firmware
upgrades are available.
Step 1:
Check what’s in the box
WP-789T
HDMI 4K Wall-Plate Line Transmitter
1 Quick start guide
Installation accessories
1 Power adapter (with open DC head) and cord
Frame (or frame set) and faceplate
Step 2: Get to know your WP-789T
#
Feature
Function
1
HDMI™ IN Connector
Connects to an HDMI source.
2
STATUS LED
LED Color
HDBT Connected
Source Detected
Acceptor Detected
Blue
Yes
Yes
Yes
Green
Yes
Yes
No
Yellow
Yes
No
N/A
White
Device is powered with no detected connections.
STATUS LED is off only when the device does not receive power.
3
RS-232 (G, Rx, Tx, PROG)
4-pin Terminal Block Connector
Connects to an RS-232 port (see
Step 5: Configure the WP-789T
).
4
IR (Rx, Tx-1, Tx-2), 3-pin
Terminal Block Connectors
Connect to an external IR infrared emitter (see
Step 5: Configure the WP-789T
).
5
Ring Tongue Terminal
Grounding Screw
Connect to grounding wire (optional).
6
HDBT OUT RJ-45 Connector
Connect to the HDBT IN connector on a receiver (for example,
TP-789R
).
7
Power Supply 2-pin Terminal
Block Connector
Connect to a power supply (if required). Connect GND to GND, +12V to +12V.
