Kramer WP-5VH2, User Manual

Page: 48 / 101

42 WP-5VH2 - Protocol 3000
13.2 Kramer Protocol 3000 Commands
The following table lists the Protocol 3000 commands that the
WP-5VH2
supports.
For a full description of the commands, see the
Kramer Protocol 3000
document
available from http://www.kramerelectronics.com .
Note
: The
WP-5VH2
can only receive commands from a device, (for example, an
HDBT transmitter) via the HDBaseT link, and only at 9600bps.
Command Description
# Protocol handshaking
AUD-EMB? Get audio in video embedding status
AUD-LVL Set/get audio level in specific amplifier stage
AUD-SIGNAL? Get audio input signal status
AV-SW-MODE? Get auto-switch mode
AV-SW-TIMEOUT Set/get video auto-switch timeout
BUILD-DATE? Read device build date
CPEDID Copy EDID data from the output to the input
DEL Delete user file
DIR List files in device
DISPLAY? Get output HPD status
ETH-PORT Set/get Ethernet port protocol
FACTORY Reset to factory default configuration
FCT-MAC Set MAC address
FCT-MODEL Set model name
FCT-SN Set serial number
FORMAT Format file system
FPGA-VER? Get current FPGA version
FS-FREE? Get file system free space
GEDID Read EDID data
GET Get file
HDCP-MOD Set/get HDCP mode
HDCP-STAT? Get HDCP signal status
HELP Get command list
LDEDID Write EDID data to input
LDFW Load new firmware
LOAD Load new Transwitch firmware
LOCK-EDID Lock last read EDID
LOGIN Set/get protocol permission
LOGOUT Cancel current permission level
MODEL? Read device model