WP-5VH2 - Principles of Operation
13
13
6
Principles of Operation
The
WP-5VH2
selects video and audio inputs based on the rules described below.
6.1
Input Selection
The video mode selection is set by the DIP-switches (see
Section 8.1
) to either of
the following modes:
Manual
Auto—Last connected or priority mode
In manual mode the input is selected using the remote input selection switches or
the Web-page interface and occurs whether or not there is a live signal present on
the input.
In auto mode, switching selection can be based on either last connected or priority
inputs.
In last connected mode the
WP-5VH2
selects the input based on which input was
connected last. If the signal on this input is subsequently lost for any reason, the
input with a live signal and which was also the last connected is selected
automatically.
In priority mode, when the input signal sync is lost for any reason, the input with a
live signal and next in priority and which is connected is selected automatically.
This priority is configurable with the default setting being HDMI > PC.
Note
: In both last connected and priority modes, manually selecting an input using
the remote input selection switches overrides the last-connected automatic
selection.
6.2
Signal Loss and Unplugged Cable Timeouts
In both last connected and priority modes, when the input signal sync is lost (but
the cable is not removed) there is a default delay of five seconds (not applicable to
