KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your WP-230
4
Table 1: WP-230 Front Panel Features
# Feature
Function
1 Holes (2)
For fastening the wall plate in place
2
XGA
1
INPUT
HD15F
Connector
Connect to the computer graphics source
3 CV IN RCA Connector Connects to the composite video source
4 RJ-45
Connector
Connect to
2
the RJ-45
connector on a Kramer CAT5 transmitter / receiver
5 Y/C IN 4p Connector
Connects to the s-Video source
6 PC AUDIO INPUT
3.5mm Mini Jack
Connects to the unbalanced stereo audio PC source
7
RIGHT
RCA
Connector
Connects to the unbalanced right stereo audio source
8
LI
N
E
A
U
D
IO
IN
P
U
T
LEFT
RCA
Connector
Connects to the unbalanced left stereo audio source
9
ON
LED
Illuminates when receiving power
4.2 Your WP-230 Left Panel
Figure 2 and Table 2 define the left panel of the
WP-230
:
Table 2: WP-230 Left Panel
# Feature
Function
1 LINE AUDIO OUT
Terminal Block
Connects to the balanced
stereo audio acceptor
3
2
R
Trimmer
Adjusts
4
the right audio
output signal level
3
LI
N
E
A
U
D
IO
LE
V
E
L
L
Trimmer
Adjusts
4
the left audio output
signal level
4
C
Trimmer
Adjusts
4
the C level
5
Y
/C
L
E
V
E
L
Y
Trimmer
Adjusts
4
the Y level
6 Y/C OUT Terminal Block Connects to the s-Video
acceptor
7 PC AUDIO OUT Terminal
Block Connector
Connects to the balanced
stereo audio from the PC
3
Figure 2: WP-230 Left Panel
1 Can be used for any RGBHV resolution (for example, VGA, XGA, UXGA and so on)
2 Using a UTP cable with an RJ-45 connector (the PINOUT is defined in section 5.2)
3 Can be used for unbalanced audio. To do this, connect using the “+” and “G” terminal only (leave the “–” terminal
unconnected – see Figure 6)
4 Insert a screwdriver into the small hole and carefully rotate it, trimming the appropriate level
