Using the WP-230
9
5.3 Operating the WP-230
To operate your
WP-230
:
1. Connect your computer graphic’s source (for example, a laptop’s digital
graphics card) to the XGA INPUT HD15F connector and to the PC
AUDIO INPUT
3.5mm mini jack, for example, using a Kramer
C-GMA/GMA cable (VGA HD15M +Audio jack to VGA HD15M
+Audio jack)
1
.
(Alternatively, you can connect
separate
audio source to the PC AUDIO
INPUT.)
2. Connect the composite video source (for example, a composite video
player) to the CV IN RCA connector and to the LEFT and RIGHT LINE
AUDIO INPUT RCA
connectors.
3. Connect the s-Video source (for example, an s-Video player) to the
s-Video IN 4p connector. Instead of connecting the audio from the
composite video player, you can as an alternative connect the audio from
the s-Video player to the LEFT and RIGHT LINE AUDIO INPUT RCA
connectors.
4. Connect
2
the CAT5 RJ-45 connector (see section 5.2).
5. If required, adjust
3
the left and/or right LINE AUDIO levels, and/or the Y
and/or C levels, and/or the
XGA EQ.
4
level, and/or the
CV
level
/
EQ.
level.
1 Not supplied. The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
2 Using a UTP cable with an RJ-45 connector (the PINOUT is defined in section 5.2)
3 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
4 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals
