![background image](http://html.mh-extra.com/html/kramer/wp-120/wp-120_user-manual_2002008010.webp)
WP-120 - Connecting the WP-120
7
4
Connecting the WP-120
Always switch off the power to each device before connecting it to your
WP-120
. After connecting your
WP-120
, connect its power and then
switch on the power to each device.
To connect the
WP-120
:
1. Connect the line out RJ-45 connector of the transmitter to the pre-installed
UTP wiring in the wall box opening that connects via UTP cabling to the
LINE IN RJ-45 connector of the
WP-120
.
2. Connect your 12V DC power supply to the
POWER SUPPLY
pins, taking
care that polarity is correct.
Connect the wire labeled “+” to the +12V pin, and the wire labeled “–” to the GND pin.
3. Insert the
WP-120
directly into the wall box opening, and then mount the
front panel securely using the screws.
4. Connect the XGA acceptor to the
XGA OUT
15-pin HD connector.
i
Summary of Contents for WP-120
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL WP 120 XGA Line Receiver P N 2900 000335 Rev 2 ...
Page 2: ......
Page 13: ......