Your WAP-1 Audio Wall Plate
5
4.2 The WAP-1 US Version
Figure 4 and Table 3 define the WAP-1 US version:
Figure 4: WAP-1 (US Version)
Table 3: WAP-1 Features (US Version)
#
Feature
Function
1
LEVEL Potentiometer
Adjusts
1
the stereo audio output signal level
2
ON LED
Illuminates when receiving power
3
INPUT 1 Unbalanced Stereo
AUDIO 3.5mm Mini Jack
Connects
2
to the unbalanced stereo audio source 1
4
SELECT Button
Press to select input 2, or release to select input 1
5
INPUT 2 Unbalanced Stereo
AUDIO 3.5mm Mini Jack
Connects to the unbalanced stereo audio source 2
6
SUPPLY (12VDC) / POWER
3
Connect “-” to the Ground; “+” to the connector for powering the
unit
7
INPUT 1 (REAR) Unbalanced
Stereo AUDIO Terminal Block
connector
Connects
2
to the unbalanced stereo audio source 1 (via 3 rear
panel PINS)
8
SPKR OUT Terminal Block
Connector
Connects to the stereo audio speakers
1 Use a screwdriver to carefully rotate the Potentiometer, adjusting the appropriate level
2 Alternative ways to connect to source 1
3 Connect your 12V DC power supply to these PINS, taking care that the polarity is correct: the wire labeled “+” to the +12V
pin, and the wire labeled “–” to the GND pin