Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
VW-9
.
This diagram shows an example of configuring a 3x3 video wall in multi-viewer mode. Other configurations can be set via the
embedded webpages.
Step 5: Connect power
Connect the power cord to
VW-9
and plug it into the mains electricity.
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
•
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.
•
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
•
To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the bottom of the unit.
