12
VS-88HN - Operating the VS-88HN 8x8 HDMI Matrix Switcher
6
Operating the VS-88HN 8x8 HDMI Matrix
Switcher
This section describes how to:
Switch an input to an output (see
Section
6.1
)
Acquire the EDID (see
Section
6.2
)
Store and recall switch settings (see
Section
6.3
)
Change the port switching speed (see
Section
6.4
)
Set HDCP on or off (see
Section
6.5
)
Reset the
VS-88HN
IP parameters (see
Section
6.6
)
Switch between Protocol 2000 and Protocol 3000 (see
Section
6.7
)
Connect to the
VS-88HN
via RS-232 (see
Section
6.8
)
Connect to the
VS-88HN
via Ethernet (see
Section
6.9)
Upgrade the firmware (see
Section
6.10
)
6.1
Switching an Input to an Output
To switch an input to an output:
Press an output button followed by an input button to switch the selected
input to the selected output
6.2
Acquiring the EDID
You can acquire the EDID from any of the following:
One output set to one or more of the eight inputs (see
Section
6.2.1
)
Different outputs set to different inputs (see
Section
6.2.2
)
The default EDID (see
Section
6.2.3
)
Note:
Attempting to acquire the EDID from an output that does not have a display
device connected to it results in the default EDID being acquired.