![background image](http://html1.mh-extra.com/html/kramer/vs-88hcb/vs-88hcb_user-manual_2001443018.webp)
Connecting the VS-88HCB
15
6.4 Controlling the VS-88HCB via the Ethernet Port
You can connect the
VS-88HCB
via the ETHERNET in the following ways:
For direct connection to the PC, use a crossover cable (see section 6.4.1)
For connection via a network hub or network router, use a
straight-through cable (see section 6.4.2)
6.4.1
Connecting the ETHERNET Port directly to a PC (Crossover
Cable)
You can connect the Ethernet port of the
VS-88HCB
to the Ethernet port on
your PC, via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory default
IP Address of the
VS-88HCB
during the initial configuration
After connecting the Ethernet port, configure your PC as follows:
1. Right-click the My Network Places icon on your desktop.
2. Select
Properties
.
3. Right-click Local Area Connection Properties.
4. Select
Properties
.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the
Properties
Button (see
Figure 9).
Figure 9: Local Area Connection Properties Window
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203