![background image](http://html1.mh-extra.com/html/kramer/vs-88fo/vs-88fo_user-manual_2001435009.webp)
VS
-8
8
F
O
–
O
v
e
rv
ie
w
6
Figure 1: VS-88FO 8x8 3G HD-SDI Fiber Optic Matrix Switcher Front Panel
#
Feature
Function
1
IR
Receiver
The yellow LED illuminates when receiving signals from the infrared remote control transmitter
2
POWER
LED
Illuminates when the unit is ON
3
ALL
Button
Pressing
ALL
followed by an
INPUT
button, connects that input to all outputs
4
OFF
Button
Pressing
OFF+OUT
disconnects that output from the inputs;
pressing
OFF+ALL
disconnects all the outputs
5
IN SELECT
Buttons
Select the input to switch to the output;
long presses on buttons
IN 1
to
IN 5
change the genlock timing (see
Section
5.4
)
6
OUT SELECT
Buttons
Select the output to which the input is switched; pressing
OUT 1
+
OUT 2
selects Protocol 2000; pressing
OUT 1
+
OUT 3
selects Protocol 3000
7
STO
(STORE) Button
Pressing
STO
followed by an
IN
/
OUT
button stores the current setting
8
RCL
(
RECALL
) Button
Pressing the
RCL
button and the corresponding
IN
/
OUT
key under the selected button recalls a setup
from the non-volatile memory
9
LOCK
Button
A long press toggles activation/inactivation of the front panel buttons
10
TAKE
Button
Pressing
TAKE
toggles the mode between the
CONFIRM
mode and the
AT ONCE
mode (user
confirmation per action is unnecessary)
11
INPUT STATUS
LEDs
Illuminate green when an active input is detected
12
7-segment
Display
Displays the selected input switched to the output (marked above each input)