Connecting the VS-808YC
11
6.2 Controlling via RS-232 (for example, using a PC)
To connect a PC to the
VS-808YC
unit, using the Null-modem adapter
provided
with
the machine (recommended):
Connect the RS-232 9-pin D-sub rear panel port on the Master
VS-808YC
unit to the Null-modem adapter and connect the Null-modem adapter with
a 9-wire flat cable to the RS-232 9-pin D-sub port on your PC
To connect a PC to the
VS-808YC
unit,
without
using a Null-modem adapter:
Connect the RS-232 9-pin D-sub port on your PC to the RS-232 9-pin
D-sub rear panel port on the Master
VS-808YC
unit, as Figure 4
illustrates
9-pin D-sub
(From PC)
9-pin D-sub
(Male)
If a shielded cable is used, connect the shield to PIN 5
PIN 4 is connected to PIN 6
PINs 8, 7, 1 are connected together
PIN 5 Connected to PIN 5 (Ground)
PIN 3 Connected to PIN 2
PIN 2 Connected to PIN 3
Figure 4: Connecting a PC without using a Null-modem Adapter