![background image](http://html.mh-extra.com/html/kramer/vs-44h/vs-44h_user-manual_2001352014.webp)
Operating the VS-44H 4 x 4 HDMI Matrix Switcher
11
11
7.1 Routing Inputs to Outputs
To route an input to an output:
•
Press an OUT key, followed by an IN key to route this input to that
output
To route one input to all outputs:
•
Press ALL followed by an IN button. The input is routed to all outputs
7.2 Disconnecting the Outputs
To disconnect one output:
•
Press the OUT button of the output to disconnect and press OFF
To disconnect all outputs at once:
•
Press the ALL button and then press OFF. This disconnects all the
outputs
7.3 Storing and Recalling a Setting
You can use the STO and RCL buttons to store up to 8 setups and then recall
them.
To store a setting:
1. Set the machine to the desired setting.
For example, press the OUT 3 button and IN 4 button
1
2. Press the STO button.
The STO button blinks.
.
3. Select an OUT or IN SELECT button to store the machine setting (for
example, OUT 4).
4. Press the LOCK button
2
To recall a setup:
to store the current setup.
In this example, the OUT 4 button stores the setting.
1. Press the RCL button.
The RCL button blinks.
2. Press the relevant OUT or IN button that stored the setting.
In this example, press OUT 4.
3. Press the LOCK button to recall the stored setting.
1 You can set all the switcher IN-OUT buttons
2 You have to press the LOCK button within 10 seconds, before the store operation times out