Connecting a VS-41HDMI 4x1 HDMI Switcher
9
6 Connecting a VS-41HDMI 4x1 HDMI Switcher
To connect the
VS-41HDMI
4x1 HDMI Switcher
(as illustrated in Figure 2),
do the following
1
:
1. If required:
Set the appropriate INPUTS to the DVD mode (see section 7.1)
Acquire the EDID (see section
7.2
)
2. Connect
2
the HDMI sources as follows
3
:
A multimedia player to INPUT 1
A set top box to INPUT 2
A DVD player to INPUT 3
A DVD player to INPUT 4
3. Connect the OUTPUT HDMI connector to an HDMI acceptor (for example, a
plasma display).
4. If required, connect a PC and/or controller to the RS-232 port (see section 7.3)
and/or the ETHERNET port (see section 7.4).
5. Connect the power connector to the mains electricity (not shown in Figure 2).
Press an INPUT SELECTOR button (from 1 to 4) to choose which HDMI
input to route to the output.
1 Switch OFF the power on each device before connecting it to your VS-41HDMI. After connecting your VS-41HDMI,
switch on its power and then switch on the power on each device
2 You do not have to connect all the HDMI sources
3 Alternatively, you can connect a PC to any of the inputs and set those inputs to the PC mode (see section 7.1)
