Your VS-41HDMI 4x1 Switcher
7
Table 2: VS-41HDMI 4x1 HDMI Switcher Front Panel Features
#
Feature
Function
1
IR Receiver
The red LED lights when receiving signals from the
Infra-red remote control transmitter
2
POWER
Switch
Illuminated switch for turning the unit ON or OFF
3
MUTE
Button
Press to toggle disconnecting the output
4
INPUT SELECTOR
Buttons
Press an INPUT button to select an input (from 1 to 4)
5
EDID
Button
1
Press to acquire the EDID
6
PANEL LOCK
Button
Press to toggle disengaging the front panel buttons and
to set to the PC/DVD mode
Table 3: VS-41HDMI 4x1 HDMI Switcher Rear Panel Features
#
Feature
Function
7
INPUT
HDMI Connectors
Connect to the HDMI sources (from 1 to 4)
8
OUTPUT
HDMI Connector
Connect to the HDMI acceptor
9
RS-232
DB 9F Port
Connects to the PC or the RS-232 Remote Controller
10
ETHERNET
Connector
Connects to the PC or other Ethernet Controller
11
RESET
Button
Press the ETHERNET factory reset button to reset to the
factory default definitions
2
:
IP number 192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
12
Power Connector with Fuse
AC connector enabling power supply to the unit
1 Illuminates when configuring the EDID
2 First disconnect the power cord and then connect it again while pressing the RESET button. The unit will power up and load
its memory with the factory default definitions