Connecting a VS-41HC 4x1 HDMI Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
6
4.1 Using the IR Transmitter for the VS-41HC 4x1 HDMI Switcher
You can use the
RC-IR3
IR transmitter to control the machine via the built-in
IR receiver on the front panel or, instead, via an optional external IR
receiver
1
. The external IR receiver can be located 15 meters away from the
machine. This distance can be extended to up to 60 meters when used with
three extension cables
2
Before using the external IR receiver, be sure to arrange for your Kramer
dealer to insert the internal IR connection cable
16F
3
with the 3.5mm connector
that fits into the REMOTE IR opening on the rear panel. Connect the external
IR receiver to the REMOTE IR 3.5mm connector.
5 Connecting a VS-41HC 4x1 HDMI Switcher
To connect the
VS-41HC 4x1 HDMI Switcher
(as illustrated in
Figure 2
), do
the following
17F
4
:
1. If required, acquire the EDID (see section
6
).
2. Connect the OUTPUT HDMI connector to an HDMI acceptor (for example,
an LCD display).
3. Connect
18F
5
the HDMI sources as follows:
A multimedia player to INPUT 1
A set top box to INPUT 2
A DVD player to INPUT 3
A DVD player to INPUT 4
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 2
).
Press an INPUT SELECTOR button (from 1 to 4) to choose which HDMI
input to route to the output.
1 Model: C-A35M/IRR-50
2 Model: C-A35M/A35F-50
3 P/N: 505-70434010-S
4 Switch OFF the power on each device before connecting it to your VS-41HC. After connecting your VS-41HC, switch on
its power and then switch on the power on each device
5 You do not have to connect all the HDMI sources
