KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the Video Matrix Switcher
10
6 Connecting the Video Matrix Switcher
You can install the
VS-3232V
as:
A composite video standalone switcher (see section 6.1)
An s-Video switcher, by combining two
VS-3232V
switchers: one unit for
the Y signal and the second unit for the C signal (see section 6.2.1)
A component video (YUV/RGB) switcher, by combining three
VS-3232V
units: one for the Y signal, the second for the U signal and the third for the
V signal (see section 6.2.2)
An RGBS switcher, by combining four
VS-3232V
units: one for the R
signal, the second for the G signal, the third for the B signal and the fourth
for the SYNC (see section 6.2.3)
6.1 Connecting the VS-3232V as a Composite Video Switcher
To install the
VS-3232V
as illustrated in the example in Figure 3, do the
following
1
:
1. Connect up to 32 composite video sources (for example
2
, two composite
video players).
2. Connect up to 32 composite video acceptors (for example
2
, two displays).
3. Set the dipswitches (see section 6.2.3).
4. If required, connect a PC and/or controller to the RS-232 port (see
section 6.4.1) and/or the RS-485 port (see section 6.4.2) and/or the
ETHERNET port (see section 6.6).
5. Connect the power cord
3
.
6. If necessary, review and set the system variables, using the MENU function,
and the default setup (UNITY setting) as section 8 describes.
1 Switch OFF the power on each device before connecting it to your VS-3232V
2 In this example only two inputs and two outputs are connected
3 We recommend that you use only the power cord that is supplied with this machine
Summary of Contents for VS-3232V
Page 1: ...Kramer Electronics Ltd USER MANUAL Model VS 3232V 32x32 Video Matrix Switcher ...
Page 6: ...KRAMER SIMPLE CREATIVE TECHNOLOGY Getting Started 2 ...
Page 11: ...Your Video Matrix Switcher 7 Figure 2 VS 3232V 32x32 Video Matrix Switcher Rear Panel ...
Page 15: ...Connecting the Video Matrix Switcher 11 Figure 3 Configuring the VS 3232V for Composite Video ...