Kramer VS-3232DN-EM, User Manual

Page: 46 / 128

Kramer Electronics Ltd.
VS-3232DN-EM
– Using the Input / Output Cards
43
Defining the DT-IN4-F32 / DT-OUT4-F32
The DT-IN4-F32 is a 4-Input 4K60 4:2:0 HDMI over HDBaseT card (F-32).
The DT-IN4-F32 inputs four HDBaseT signals with bidirectional RS-232 and IR from the line
to the chassis:
The DT-OUT4-F32 is a 4-Output 4K60 4:2:0 HDMI over HDBaseT card (F-32).
The DT-OUT4-F32 outputs four HDBaseT, bidirectional RS-232 and IR signals from the
chassis to the line:
The DT-IN4-F32 and DT-OUT4-F32 cards feature Kramer Equalization and re-
Klocking™
technology. The cards include terminal block for connecting RS-232 and an IR emitter, such
as the
C-A35M/IRE , or an IR receiver, such as the C-A35M/IRRN . For information on the IR
wiring scheme, see IR Wiring Scheme for HDBT Cards on page 49 . For information on
connecting via RS-232, see Connecting to the VS-3232DN-EM via RS-232 on page 15 .
DT-IN4-F32 / DT-OUT4-F32 Configuration
The DT-IN4-F32 configuration table appears as follows:
DT-IN4-F32 Input Card
Parameter Description Default
Reset Input Re-power: power cycle the port.
Factory default: perform a factory reset of the port to default values.
Re-power
HDCP Turn HDCP on and off.
*1=EN, 0=DIS. 1
The DT-OUT4-F32 configuration table appears as follows:
DT-OUT4-F32 Output Card
Parameter Description Default
Reset
Output Re-power: power cycle the port.
Factory default: perform a factory reset of the port to default values. Re-power
Switch
Speed When switching between different sources the switching time can be reduced
by setting the fast switch level (Fast Switch or Normal Switch). Normal
Switch
DT-IN4-F32 / DT-OUT4-F32 Technical Specifications
HDBT cards must be used with twisted pair cables with RJ-45 connections, such as Kramer
BC-UNIKAT shielded twisted pair (U/FTP) cables.