Kramer VS-1616DN-EM User Manual Download Page 71

Page: 71 / 156

Kramer Electronics Ltd.

VS-1616DN-EM

– Using the Input / Output Cards

HAA-IN2-F16 / HAA-OUT2-F16 Technical Specifications

The following table defines the technical specifications.

PORTS:

2 HDMI
2 Analog audio on 3.5mm mini jacks

BANDWIDTH PER CHANNEL:

2.25Gbps

TOTAL BANDWIDTH:

6.75Gbps

MAXIMUM RANGE:

15m (49ft)

3D PASS THROUGH:

Supported

POWER CONSUMPTION:

Input card: 6.5W
Output card: 7W

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

–40° to +70°C (–40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

19cm x 13cm x 2cm (7.5” x 5.1” x 0.8”) W, D, H

PRODUCT WEIGHT:

0.23 kg (0.51 lbs) approx.

SHIPPING WEIGHT:

0.37 kg (0.82 lbs) approx.

STANDARD COMPLIANCE:

HDCP 1.4

SAFETY REGULATORY COMPLIANCE:

ENVIRONMENTAL REGULATORY
COMPLIANCE:

Complies with appropriate requirements of RoHs and
WEEE

Defining the HDCP-IN2-F16 / HDCP-OUT2-F16

The

HDCP-IN2-F16

is a 2-Input DVI (HDCP) Card (F-16):

The

HDCP-OUT2-F16

is a 2-Output DVI (HDCP) Card (F-16):

HDCP-IN2-F16 / HDCP-OUT2-F16 Configuration

The

HDCP-IN2-F16

configuration table appears as follows:

HDCP-IN2-F16 Input Card

Parameter Description

Default

HDCP

Turn HDCP on and off.
*0=EN, 1=DIS.

Summary of Contents for VS-1616DN-EM





























































































































































Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands

Kramer VS-1616DN-EM, User Manual

Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands