28
VP-790 - Controlling the VP-790
7
Controlling the VP-790
The
VP-790
can be controlled via:
The front panel buttons (see
Section
7.1
)
RS-232 serial commands transmitted by a touch screen system, PC, or other
serial controller (see
Section
7.2
)
The ETHERNET (see
Section
7.3
)
The infrared remote control transmitter (see
Section
7.4
)
7.1
Controlling via the Front Panel Buttons
The
VP-790
includes the following front panel buttons:
Input selector buttons for selecting the required input: SDI, s-Video (YC), CV
(1 and 2), COMPONENT (YPbPr), PC, HDMI, or DVD-D
The PIP button
MENU, ENTER, and arrow buttons (up, down, left and right)
RESET TO XGA/720p and PANEL LOCK buttons
7.2
Connecting to the Product via RS-232
You can connect to the
VP-790
via an RS-232 connection using, for example, a PC.
Note that a null-modem adapter/connection is not required.
To connect to the
VP-790
via RS-232, connect the RS-232 9-pin D-sub rear panel
port on the
VP-790
unit via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3,
and pin 5 to pin 5 need to be connected) to the RS-232 9-pin D-sub port on your
PC.
7.3
Controlling via the Ethernet
You can connect the
VP-790
via the Ethernet, using a crossover cable (see
Section
7.3.1
) for direct connection to the PC or a straight through cable (see
Section
7.3.2
)
for connection via a network hub or network router.