Kramer VP-774A, User Manual

Page: 26 / 122

20 VP-774AMP - The OSD Menu
6.2 The Input Menu
Figure 10: Input Menu
Setting Function
Display Mode
Select the display mode (see Figure 11 ):
Single Window
– single window mode operation with one channel displayed
E
Picture in Picture ( PiP )
– dual window mode operation, a smaller window
superimposed over a full screen image (see Section
7.2
) E
P Picture ( PoP )
– dual window mode operation, both images appear
side-by-side and the aspect ratios of both images are maintained (see
Section
7.2
) E
Split ( SbS )
– dual window mode operation, both images are placed side-by-
side with the same height (see Section
7.2
) E
When selecting the dual window mode, set the Main window or the PiP window
parameters via Misc -> OSD -> Window Control (see
Section
6.8
)
Note that while browsing the OSD menu in the dual window mode, press of the PIP
button to instantly toggle the window control (between Main and PiP)
Customized
– customized image size
E
Note that any change in the output resolution may cause
disproportion or even cancel the window customization.
Input Source Select the input source: HDMI1, HDMI2, HDMI3, HDMI4, PC1, PC2, CV, DP
or SDI
M / P
Note that any change in the input source may cancel the freeze
and blank settings.
i
i