Kramer VP-774 User Manual Download Page 69

Page: 69 / 85

VP-774 - The VP-774 RS-232 Communication Protocol

The VP-774 RS-232 Communication Protocol

The Kramer Protocol lets you control the

VP-774

from any standard terminal

software (for example, the Windows

HyperTerminal Application).

12.1

Using the Communication Protocol

There are three different methods to control the

VP-774

via the RS-232 or the

Ethernet:



Protocol commands (via protocol 3000 or Legacy Protocol) mimicking the

OSD, see

Section

12.2



The button functions mimicking the remote controller buttons (as well as the

front panel buttons), see

Section

12.3



Protocol 3000 common commands, see

Section

12.4

All three tables together include all the protocol commands, but they
are not identical and do not always include the same information.
Some of the data may appear in one or two of the tables but not in the

third table and vice versa.

The protocol 3000 communications protocol uses a data rate of 115200 baud, with

no parity, 8 data bits, and 1 stop bit.

The Legacy communication protocol uses a data rate of 9600 baud, with no parity,

8 data bits and 1 stop bit. CTS mode and XON/XOFF are set to Off.

Note that if the Protocol is set to Legacy (via the Miscellaneous menu,
see

Section

6.8

), some PC applications (for example, K-Upload), as

well as the Web pages may not function properly.

12.2

Communication Protocol: Mimicking OSD

The audio/video protocol commands defines all the function numbers, their valid

parameters can be used with protocol 3000 or the Legacy protocol.

Summary of Contents for VP-774






















































































Search results

Summary of Contents for VP-774

Reviews:

Related manuals for VP-774

Brands by name

Popular brands

Kramer VP-774, User Manual

Search results

Summary of Contents for VP-774

Reviews:

Related manuals for VP-774

Brands by name

Popular brands