VP-733
–
Using the Embedded Web Pages
55
9.5
The Output Settings Page
shows the Program and Preview Output Settings page.
Figure 42: The Output Settings Page
Button
Function
Resolution
Define the Program and Preview resolutions (setting to single
picture sets the PIP mode)
Aspect ratio
Set the Program and Preview aspect ratios (see
Section 7.3.1
Zoom
Set the Program and Preview zoom from 100% to 400% or
click custom to set the custom zoom and enable Zoom
Horizontal Pan and Zoom Vertical Pan
Overscan
Select On or Off; set to On to stretch the output picture
HDCP
Select Follow Input or Follow Output to define whether the HDCP
will follow the input or the output
HDMI 1 Out Mode
Select the output for HDMI 1 to Follow Program or Follow Preview
HDMI 1 Type
Set the HDMI1 output type to Auto, HDMI or DVI
HDMI 2 Type
Set the HDMI 2 output type to Auto, HDMI or DVI
Test Patterns
Set the test pattern to Colorbar, SMPTE, Greyscale, Picture
Border, Multiburst, Ramps, H-pattern, Setup, or set to Off
Program audio slider
Use to set the Program output volume
