Kramer VP-733, User Manual

Page: 61 / 116

VP-733
–
Using the Embedded Web Pages 53
9.4 The Input Settings Page
The Input Settings page lets you setup the Program and PIP/Preview inputs and
can also be accessed via the edit icon in the Scaling & Routing page, see Section
9.2.10 .
Figure 41: The Input Settings Page
The following table defines the Input Settings page items:
Button Function
Source Select the input source (appears with the label), see Section
7.1
Label Label the input
Priority Set the priority (for auto switching)
Source type (UNIV) Set the type of the analog source (VGA/Component/YC/Video),
disabled if the selected input is not UNIV, see
Section 7.1
HDCP (HDMI &
DisplayPort)
Set to ON or OFF
Fine-Tune Adjust the image parameters Horizontal and Vertical Position,
Frequency and Phase, for VGA images, see
Section 7.2