VP-733
–
Configuring the VP-733 via the OSD MENU Screens
25
7.1
The Input Screen
Figure 14: Input Screen
Setting
Function
Default
Program Output
Select the input to switch to the Program output: UNIV 1 to
UNIV 4, HDMI 1 to HDMI 4, DP 1, DP 2, HDBT 1 or HDBT 2
UNIV 1
Preview Output
Select the input to switch to the Preview output: Follow
Program, UNIV 1 to UNIV 4, HDMI 1 to HDMI 4, DP 1, DP 2,
HDBT 1 or HDBT 2
Note that if the preview output resolution is set to Single
Picture, this function will be grayed and set to Follow
Program
Follow
Program
Auto switching
Set auto switching to Off or On
Set to On to have the system scan for a valid input in
accordance with the Auto-switch priority setup (see
Section
Off
Source type
Set the source type for each universal input: VGA,
Component, YC or Video
VGA
Standard
Select the color format to Auto/RGB/YUV (for HDMI and DP
inputs) and the video standard to Auto/NTSC/PAL/PAL-
M/PAL-N/NTSC 4.43/SECAM/PAL-60 (for YC and
composite video inputs)
Auto
Fine-Tune
Set the H-Position, V-Position, Frequency and Phase for
VGA inputs only
We recommend that you update the Hpos, Vpos, Frequency
and Phase values (in the Fine-tune OSD menu) only after
Auto Image is complete (if necessary).
Auto Image
Assesses the image and improves the quality accordingly,
by automatically adjusting the phase, frequency and position
We recommend that you update the Hpos, Vpos, Frequency
and Phase values (in the Fine-tune OSD menu) only after
Auto Image is complete (if necessary).
Enabled for VGA
