Kramer VP-733, User Manual

Page: 21 / 116

VP-733
–
Connecting the VP-733 13
8. If required, connect:
▪
A PC via RS-232, see Section 5.2
▪
The ETHERNET port, see Section 5.4
Figure 3: Connecting to the VP-733 Rear Panel
5.1 Universal Connector Pinout
This section describes the UNIV connectors from 1 to 4. Each connector can be set
as computer graphics, composite video, s-Video (Y/C) or component video.
Figure 4 and the table below define the connector pinout:
PIN # VGA COMP s-Video CV
Figure 4: UNIV 15-pin HD
Connector Pinout
1 R Pr
2 G Y S_Y Composite video
3 B Pb S_C
9 +5VD
12 EDID_SD
A
13 H_Sync
14 V_Sync
15 EDID_SC
L
Note that PINs 5, 6, 7, 8 and 10 are GND