KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the VP-727A Audio Switcher
8
6 Configuring the VP-727A Audio Switcher
This section describes how to:
Connect the
VP-727A
(see section 6.1)
Connect a PC (see section 6.2)
Configure an AV presentation switcher, with a controller (see section 6.3)
Connect via the RS-485 (see section 6.4)
6.1 Connecting the VP-727A Audio Switcher
To connect
1
the
VP-727A
as illustrated in the example in Figure 3, do the
following
2
:
1. Connect the unbalanced audio sources to the inputs
3
. For example, the
unbalanced audio signal of:
A DVD player to the INPUT 1 LEFT and RIGHT RCA connectors
A camera to the INPUT 3 LEFT and RIGHT RCA connectors
An HDTV satellite receiver to the INPUT 5 LEFT and RIGHT RCA
connectors
2. Connect the following unbalanced audio outputs
4
:
The PROGRAM LEFT and RIGHT RCA connectors to a Program
acceptor (for example, a power amplifier with speakers)
The PREVIEW LEFT and RIGHT RCA connectors to a Preview
acceptor (for example, the Kramer
901
Personal Stereo Amplifier
5
connected to speakers)
3. Connect the RS-485 terminal block connector on the
VP-727A
to the
AUDIO CONTROL terminal block connector of the Kramer
VP-727xl
.
4. On the
VP-727A
, set DIP 8 to ON
6
. Make sure that all the other
dipswitches are set to OFF.
5. Connect the RS-485 terminal block connector on the
VP-727xl
(see
section 6.3) to the RS-485 terminal block connector of the
VP-727T
.
6. Connect the power cord
7
(not shown in Figure 3).
1 You do not have to connect all the inputs and outputs
2 Switch OFF the power on each device before connecting it to your VP-727A. After connecting your VP-727A, switch on its
power and then switch on the power on each device
3 The video inputs are connected to the VP-727xl in this example. Refer to the separate user manuals for these machines,
which can be downloaded from the Internet at this URL: http://www.kramerelectronics.com
4 You can also connect the S/PDIF digital audio RCA connector and the balanced stereo audio terminal block connector to
the appropriate audio acceptors (not illustrated in Figure 3)
5 You can download this user manual from the Internet at: http://www.kramerelectronics.com
6 When connecting the VP-727A to the VP-727, set DIP 7 to ON and make sure that all the other dipswitches are set to OFF
7 We recommend that you use only the power cord that is supplied with this machine
