Operating the Presentation Switcher / Scaler
17
Pressing the appropriate illuminated INPUT SELECTOR front panel
button or the appropriate INPUT SELECTOR key on the infra-red remote
control transmitter (see Figure 44)
The image freezes. The
FREEZE
front panel button illuminates and the
appropriate INPUT SELECTOR button flashes. The Freeze OSD status
appears superimposed over the top right corner of the screen (when the Source
Prompt is ON) for a few seconds
1
7.1.2
Displaying a Blank Screen
You can display a blank screen, as follows:
1. Press the appropriate illuminated INPUT SELECTOR front panel button
or the appropriate INPUT SELECTOR key on the infra-red remote
control transmitter (see Figure 44)
2
.
The image freezes. The
FREEZE
front panel button illuminates and the
appropriate INPUT SELECTOR button flashes. The Freeze OSD status
appears superimposed over the top right corner of the screen (when the
Source Prompt is ON) for a few seconds
1
2. Press the appropriate flashing INPUT SELECTOR front panel button or
the INPUT SELECTOR key on the infra-red remote control transmitter
(see Figure 44)
The frozen image is replaced by a blank screen. The
FREEZE
front panel
button continues to illuminate and the appropriate INPUT SELECTOR
button flashes more slowly. The Blank status appears superimposed over
the top right corner of the screen (when the Source Prompt is ON) for a
few seconds
1
You can choose the color of the blank screen (blue or black - see Figure 36).
1 By default, 20 seconds. But you can reset the timeout (from 3 to 60 seconds), see section 8.1.5.5
2 Alternatively, press the FREEZE key on the infra-red remote control transmitter (see Figure 44) or the FREEZE front panel
button. This will cause the FREEZE front panel button to illuminate and the appropriate INPUT SELECTOR button to flash
