KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using Your VP-6A 1:6 UXGA / Audio / +1 CAT5 Distributor
6
If necessary, slide the VS and HS switches to the right to output negative
sync polarity (or leave them in the left position (Normal) to retain the sync polarity)
7. On the
TP-122
:
Connect the XGA OUT HD15F connector to the XGA acceptor (for
example, a display), and connect the AUDIO OUT S/PDIF RCA connector to the
digital audio acceptor (for example, an AV Receiver), and the ANALOG
3.5mm
mini jack to the analog
audio acceptor (for example, a stereo audio recorder)
Adjust
1
the video output signal level and/or cable compensation
equalization level, if required
If necessary, set the H SYNC and V SYNC switches
2
, on the underside
Figure 3: Connecting the VP-6A
1 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
2 By default, both switches are set down (for negative V SYNC and H SYNC polarity)
