KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-6A 1:6 UXGA / Audio / +1 CAT5 Distributor
2
A stereo audio input signal: either
1
an unbalanced stereo audio input
signal on a 3.5mm mini jack, or a balanced stereo audio input signal on a 5-pin
terminal block connector. The
VP-6A
outputs 12 stereo audio signals
simultaneously: six unbalanced stereo audio signals on 3.5mm mini jacks, and
six balanced stereo audio signals on 5-pin terminal block connectors. If the
selected audio input is unbalanced, it is converted to balanced stereo audio; if
the selected audio input is balanced, it is converted to unbalanced stereo audio
The
VP-6A
can:
Power the receiver over the same CAT5 cable
Be used with the
TP-122
XGA / Audio Line Receiver
(converting the
CAT5 signal to XGA, stereo analog and S/PDIF digital audio outputs) or with
the
TP-120
XGA Line Receiver
(converting the CAT5 signal to an XGA output)
In addition, the
VP-6A
features:
Switches on the underside for ID Bit control and sync polarity
Front panel controls for UXGA equalization, as well as left and right
audio level controls
A video bandwidth of 500MHz that ensures transparent operation at all
graphics resolutions
A transmission range of more than 300 ft. (more than 100 meters) over
UTP cabling
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise levels
(often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer
VP-6A
away
from moisture, excessive sunlight and dust
In applications with high interference, shielded twisted pair (STP) cable will
give better results.
4 Your VP-6A 1:6 UXGA / Audio / +1 CAT5 Distributor
Figure 1 and Table 1 define the
VP-6A
1:6 UXGA / Audio / +1 CAT5
Distributor
:
1 Selected via a pushbutton
