Kramer VP-554X, User Manual

Page: 14 / 89

Kramer Electronics Ltd.
VP-554X
– Operating and Controlling VP-554X
12
Operating and Controlling
VP-554X
VP-554X front panel buttons enable performing the following actions:
•
Routing an input to an output on page 12 .
•
Routing a USB input to the USB output on page 12 .
•
Storing (STO) and Recalling (RCL) Outputs Via the Front Panel on page 12 .
•
Resetting the Resolution on page 13 .
•
Locking the Front Panel on page 13 .
•
Controlling Device Operation Via the OSD Menu on page 13 .
•
Operating via Ethernet on page 27 .
Routing an input to an output
To route an input to an output via the front panel:
1. Press an OUT button (1 to 4).
2. Press an HDMI input (1 to 6), an HDBT input (1 to 4) or a PC IN button.
Routing a USB input to the USB output
To route a USB input to the USB OUT port via the front panel, press a USB button
next to “To USB OUT” on the front panel.
Storing (STO) and Recalling (RCL) Outputs Via the
Front Panel
VP-554X enables storing and recalling the current device setup.
Storing the Current Configuration
To store the current configuration:
1. Set the required device configuration.
2. Press and hold STO until button flashes once.
The current configuration is stored.
2
3 4 5
24 1
6