Kramer Electronics Ltd.
VP-554X
– Operating and Controlling VP-554X
13
Recalling a Configuration
To recall the stored configuration:
•
Press and hold
RCL
until button flashes once.
The stored configuration is recalled.
Resetting the Resolution
To reset the resolution:
•
Press and hold for about 2 seconds to set the output resolution to XGA (1024x768).
•
Press and hold for about 5 seconds to set the output resolution to 1080p.
Setting the outputs to one of these common resolutions may be useful if
VP-554X
outputs at
a resolution which the display cannot recognize, in which case, it is impossible to select a
new resolution via the OSD menu.
Locking the Front Panel
To unlock/lock the front panel buttons:
•
Press and hold for about 3 seconds to lock/unlock the front panel buttons.
Controlling Device Operation Via the OSD Menu
VP-554X
enables controlling and defining the device parameters via the OSD, using the front
panel MENU buttons.
Each OUTPUT OSD includes output specific features, such as selecting the source for the
specific output, adjusting the image on the output, selecting the resolution and so on, as well
as general features (such as OSD settings, factory reset and INFO).
Before accessing the OSD menu, you need to select the OSD for a specific output.
Accessing the OSD Menu
To enter and use the OSD menu buttons:
1. On the front panel button, press
OSD SELECT
to cycle through the outputs, to select the
output to control via OSD (the OSD output). The LED lights next to the selected output.
2. Press
MENU
.
7
