Kramer Electronics Ltd.
VP-554X
– Connecting VP-554X
9
Connecting VP-554X
Always switch off the power to each device before connecting it to your
VP-554X
. After
connecting your
VP-554X
, connect its power and then switch on the power to each device.
Figure 3: Connecting to the VP-554X Rear Panel
To connect
VP-554X
as illustrated in the example in
1. Connect an HDMI source (for example, a Blu-ray player or laptop) to the HDMI IN
connector
(from 1 to 6)
.
Alternatively, you can, for example, connect the DVI connector on a DVD player to the
HDMI connector on the
VP-554X
via a DVI-HDMI adapter. When using this adapter, you
can connect the audio signal via the terminal block connector
2. Connect a VGA source to the PC IN 15-pin HD connector
.
3. Connect an HDBT IN transmitter (for example,
TP-580Txr
) to the HDBT IN RJ-45
connectors
(from 1 to 4).
4. Connect the USB IN ports
(from 1 to 4) (for example, laptops) and USB OUT port
(for example, a smart whiteboard).
5. Connect the audio inputs (see
Connecting a Balanced/Unbalanced Stereo Audio Source
) to the:
▪
Audio input 5-pin terminal block connectors
(from 1 to 8).
▪
Up to 2 microphones to the MIC 3-pin terminal blocks
(1 to 2).
6. Connect OUT 1 to OUT 4:
▪
OUT HDMI and/or HDBT output to an HDMI acceptor (for example a display / smart
whiteboard) and/or an HDBT receiver (for example,
TP-580Rxr
).
16
17
18
23
24
29
28
