VP-475UX
Quick Start
P/N:
2 9 0 0 - 3 0 1 0 3 1 QS
Rev:
2
Scan for full manual
VP-475UX Quick Start Guide
This guide helps you install and use your
VP-475UX
for the first time.
www.kramerav.com/downloads/VP-475UX
to download the latest user manual and check if firmware
upgrades are available.
Step 1:
Check what’s in the box
VP-475UX
Dual Channel 12G SDI to HDMI Scaler
2 male 75Ω terminators
1 Quick start guide
1 Power cord
1 Set of rack ears
4 Rubber feet
Step 2: Get to know your VP-475UX
#
Feature
Function
1
IN LEDs
Illuminate to indicate the input resolutions (1 and 2):
Off
– no input signal.
Red
– SDI input signal is SD:
NTSC
– 480i or 480p Interlaced or progressive video
formats.
PAL
– 576i or 576p Interlaced or progressive video
formats.
Yellow
– SDI input signal is HD:
1.5G
– 720p progressive or 1080i interlaced video
format.
3G
– 1080p progressive video format.
Blue
– SDI input signal is UHD:
6G
– 2160p30 progressive video format.
12G
– 2160p60 progressive video format
2
SDI BNC
Connectors
IN
Connect to SDI sources (1 and 2).
LOOP
Connect to the IN connector of the next unit in the daisy chain or connect to a local display
(1 and 2).
For best results, when an input is connected and it’s corresponding LOOP is
not used, connect a 75Ω terminator (supplied) to the unused LOOP connector.
For example, if IN 1 is connected and LOOP 1 is not in use, connect a
terminator plug to LOOP 1.
3
HDMI OUT Connectors
Connect to HDMI acceptors (1 and 2).
4
ANALOG OR AES/EBU XLR
(L, R) Connectors
Connect to a balanced stereo audio acceptor or to a digital AES/EBU receiver (OUT 1 and
OUT 2).
5
LAN RJ-45 Connector
Connect to a browser device via LAN and also use for firmware upgrade.
