KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-472 SDI to HDMI Scaler
6
6
Operating the VP-472 SDI to HDMI Scaler
The
VP-472
is operated directly via the front panel buttons and via the OSD menu.
6.1 Using the Front Panel Buttons
During normal operation (without the OSD), the front panel buttons perform in the
following manner:
•
MENU
: Displays the OSD Main Menu (see
Section 6.2
). Press a second
time to close the OSD
•
FREEZE
: Freezes the display. Press a second time to unfreeze the display
•
MENU
and
AUTO ADJUST
: Press together to set the output to 720p
(1280x720)
•
ENTER
and
FREEZE
: Press together to set the output to XGA (1024x768)
6.2 Using the OSD
The OSD is used to set a variety of parameters.
When using the OSD, the front panel buttons operate in the following manner:
•
MENU
: Opens the OSD main menu (see
). Press a second time to
close the OSD
•
ENTER
: Selects the highlighted menu item or parameter
•
–
: Steps up through the menu list or decrements the parameter value
•
+
: Steps down through the menu list or increments the parameter value
Note:
After a period of 15 sec with no button activity, the OSD menu times-out
automatically.
Example of Setting a Parameter
To set the green offset value of the display output to 42:
1. From normal operation, press MENU.
The OSD main menu appears on the screen.
2. Press the + or
–
button to highlight COLOR.
COLOR changes to green.
3. Press ENTER.
The Display submenu is displayed.
4. Press the + or
–
button to highlight G OFFSET.
G OFFSET changes to green.
5. Press ENTER.
The G OFFSET parameter changes to red.
6. Press the + button to increase the value to 42.
7. Press ENTER to set the value.
G OFFSET is highlighted in green.
8. To exit to normal operation, press MENU.