#
Feature
Function
15
HDMI OUT
Connector
Connect to an HDMI acceptor.
16
AUDIO OUT Terminal Block Connector
Connect to a balanced stereo audio acceptor.
17
REMOTE 4-pin Terminal Block Connector
Connect to contact closure switches (by momentary contact between the
desired pin and GND pin) to select an input.
18
24V DC
24V DC connector for powering the unit.
Step 3: Install the VP-451
Install
VP-451
using one of the following methods:
•
Attach the rubber feet and place the unit on a flat surface.
•
Fasten a bracket (included) on each side of the unit and attach it to a flat surface
www.kramerav.com/downloads/VP-451
•
Mount the unit in a rack using the recommended rack adapter
www.kramerav.com/product/VP-451
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
VP-451
. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to the
VP-451
.
Connect the audio output
To a balanced
stereo audio
acceptor:
To an
unbalanced
stereo audio
acceptor:
Step 5: Connect the power
Connect the power cord to
VP-451
and plug it into the mains electricity.
Safety Instructions (See
for updated safety information)
Caution:
•
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.
Step 6: Operate and control the VP-451
Select the input via the following options:
•
Press the front panel INPUT button.
•
Use the contact closure terminal block to select an input remotely with the press of a button.
Press the MENU button to configure and control the device via OSD menu:
•
Set brightness, contrast, color, noise reduction etc.
•
Select the input.
•
Select resolution, aspect ratio and manage bypass.
•
Manage audio input selection, volume and delay.
•
Control OSD display.
•
Configure HDCP behavior.
•
Manage auto power down (Auto Sync Off).
•
Manage EDID.
•
View device information.
•
Reset to factory default parameters.