Kramer VP-426H2, User Manual

Page: 14 / 22

VP-426H2 - Operating the VP-426H2 11
As an example of setting parameters, to increase the contrast on the display:
1. From normal operation, press MENU.
The OSD main menu appears on the screen.
2. Press the + or – button to highlight CONTRAST.
CONTRAST changes to green when highlighted.
3. Press ENTER.
The contrast value parameter changes to red.
4. Press the + button to increase the value (increase the contrast) or
the – button to decrease the value (decrease the contrast).
The value ranges from 0 to 100.
5. Press ENTER to set the value.
The contrast value parameter changes back to white.
6. To return to normal operation, highlight EXIT and press ENTER, press
MENU, or wait until the menu times out.
5.2.2 OSD Menu Structure
Main Menu Submenu Values Notes
Picture Contrast 0-100 Adjusts the contrast
Brightness 0-100 Adjusts the brightness
Finetune COMPONENT
Hue (0-100) Sets the color hue
Saturation (0-200) Sets the color saturation
Sharpness (0-200) Sets the sharpness of the picture
NR (Noise Reduction)
Off-Low-Middle-High-Auto Selects the noise reduction level:
Off, High, Low and Middle or Auto
VGA
Phase Sets the clock phase
Clock Sets the clock frequency
H-Position Sets the horizontal position of the
picture
V-Position Sets the vertical position of the
picture
Exit Select to exit to the Main Menu
Color Red 0-100 Adjusts the individual color
components of the display
Green 0-100
Blue 0-100
Exit Select to exit to the Main Menu