![background image](http://html1.mh-extra.com/html/kramer/vp-413/vp-413_user-manual_2001685012.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the Scalers
10
5.2 Connecting the VP-414
To connect the
VP-414
, as the example in Figure 6 illustrates, do the following
1
:
1. Connect a composite video source to the CV IN RCA connector and/or an
s-Video source to the Y/C 4p input connector.
2. Connect the VGA – WXGA / HD OUT HD15F connector to an acceptor (for
example, a plasma display).
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 6).
4. Press the INPUT SELECT button to select the desired input
2
.
5. Press the OUTPUT RES. button to select the desired resolution
3
.
6. If required, connect
4
the contact closure remote control PINS (see section 5.5).
Composite Video Player
s-Video Player
Plasma
Display
OUTPUT Connector PINOUT
PIN #
1
Pr
Y
Pb
2
3
Signal
Figure 6: Connecting the VP-414
1 Switch OFF the power on each device before connecting it to your VP-414. After connecting your VP-414, switch on its
power and then switch on the power on each device
2 The VP-414 includes an HD LED, which illuminates when HD resolutions are selected (item 10 in Table 3)
3 Note that the HD resolutions are in YUV colorspace
4 The connection is not illustrated in Figure 6