VP-28 - Connecting the VP-28
13
5.2
Connecting to the VP-28 via Ethernet
You can connect the
VP-28
via Ethernet via either of the following methods:
•
A crossover cable (see
Section 5.2.1
•
A straight through cable (see
) for direct connection to the PC
Section 5.2.2
After connecting the Ethernet port, you have to install and configure your Ethernet Port. For
detailed instructions, see the Ethernet Configuration Guide (Lantronix) in the technical support
section on our Web site
) for connection via a network hub
or network router
http://www.kramerelectronics.com
.
5.2.1
Connecting the Ethernet Port directly to a PC
You can connect the Ethernet port on the
VP-28
to the Ethernet port on your PC
via a crossover cable with RJ-45 connectors. This type of connection is
recommended for identification of the factory default IP Address of the
VP-28
during the initial configuration.
To configure your PC after connecting the Ethernet port:
1. Right-click the
My Network Places
icon on your desktop.
2. Select
Properties
.
3. Right-click
Local Area Connection Properties
.
4. Select
Properties
.
The
Local Area Connection Properties
window appears.
5. Select the
Internet Protocol (TCP/IP)
and click the
Properties
Button.
