Figure 2: VP-28 Presentation Switcher Rear Panel
#
Feature
Function
19
MIC IN
XLR Connector
Connect a microphone.
Note
: Only one microphone can be connected at a time
20
CV AUDIO
3.5mm Mini Jack Connectors
IN 1 ~ IN 3, OUT
Connect to the audio channel of the CV sources and acceptor
21
CV VIDEO
RCA Connectors
IN 1 ~ IN 3, OUT
Connect to the video channel of the CV sources and acceptor
22
HDMI AUDIO
3.5mm Mini Jack Connectors
IN 1 ~ IN 3, OUT
Connect to the audio channel of the HDMI sources and acceptor
23
HDMI VIDEO
Connectors
IN 1 ~ IN 3, OUT
Connect to the video channel of the HDMI sources and acceptor
24
RESET
Button
Press and hold while turning on the power to the device to reset to factory
default set ings (see
Section 6.4
25
)
PROG
Button
For the use of Kramer service personnel only
26
MASTER OUT
5-pin Terminal Block Balanced Audio Output
Connect to the balanced, stereo master audio acceptor (see
Section 5.3
27
)
DP AUDIO
3.5mm Mini Jack Connectors
IN 1, IN 2, OUT
Connect to the audio channel of the DP sources and acceptor
28
PC AUDIO
3.5mm Mini Jack Connectors
IN 1 ~ IN 3, OUT
Connect to the audio channel of the PC graphics sources and acceptor
29
DVI AUDIO
3.5mm Mini Jack Connectors
IN 1 ~ IN 3, OUT
Connect to the audio channel of the DVI sources and acceptor
30
PC/DVI VIDEO
DVI Connectors
IN 1 ~ IN 3, OUT
Connect to the PC graphics (using adapters) or DVI video channel of the video
sources and acceptor. (We recommend the Kramer ADC-DM/DF+GF (one is
supplied with the device) or the C-MDMA/MGMA cable.)
31
RS-232
Serial Port 3-pin Terminal Block
Connect to a serial controller (see
Section 5.1
32
)
AC Power Mains Socket and Fuse Holder
Connect to the mains power supply
33
DP
Connectors
DP IN 1, DP IN 2,
DP OUT
Connect to the video channel of the DisplayPort sources and acceptor
34
ETHERNET
LAN RJ-45 Connector
Connect via a LAN to an Ethernet controller (see
Section 5.1
)
VP
-28
–
O
ver
v
iew
9
