Kramer VP-23N User Manual Download Page 37

Page: 37 / 44

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Technical Specifications

9 Technical Specifications

Table 10 includes the technical specifications

Table 10: Technical Specifications of the VP-23N Presentation Switcher

INPUTS:

4 VGA / XGA on HD15F connectors

4 s-Video, 1 Vpp (Y), 0.3Vpp (C) / 75 on 4 pin connectors
4 composite video 1Vpp / 75 on BNC connectors

Each input is accompanied by the appropriate balanced stereo-audio

channels: +4dBm / 50 k on detachable terminal block connectors

Mic: 3mV / 10 k condenser / dynamic on an XLR connector

OUTPUTS:

1 x VGA / XGA on an HD15F connector

1 s-Video - 1 Vpp (Y), 0.3Vpp (C), / 75 on 4 pin connector

1 composite video 1 Vpp / 75 on a BNC connector

1 UTP CAT5 connector (Line OUT)

Each output is accompanied by the appropriate balanced stereo-audio

channel: +4dBm / 150 on detachable terminal blocks

1 master stereo audio +4dBm / 150 on a detachable 4-pin terminal block
1 stereo speaker output 2x5W continuous into 4

MAX. OUTPUT LEVEL:

VIDEO: YC: 1.8Vpp; CV: 1.8Vpp

XGA: 1.7Vpp; CAT5: 1.3Vpp

AUDIO: Group: 20dBm

Master: 15dBm

BANDWIDTH (-3dB):

VIDEO: YC: 385MHz; CV: 650MHz

XGA: 350MHz; CAT5: 158MHz

AUDIO: Group: 46kHz

Speakers: 40kHz

Master: 33kHz

DIFF. GAIN:

YC: 0.03%; CV: 0.03%; CAT5: 6.4%; XGA: 0.15%

DIFF. PHASE:

YC: 0.03 Deg.; CV: 0.03 Deg.; CAT5: 0.2 Deg.; XGA: 0.09 Deg.

K-FACTOR:

<0.1%

S/N RATIO:

VIDEO: YC: 81dB; CV: 75dB

CAT5: 59dB; XGA: 75dB (unweighted)

AUDIO: Group: 74dB

Speakers: 53dB (max pwr weighted)

Master out: 72dB

CROSSTALK (all hostile):

VIDEO: 49dB @5MHZ

AUDIO: Group: < -76dB

Master: < -69dB @1kHz

CONTROLS:

Channel selector for video and audio, for YC, CV and XGA; master audio

output selector, audio level, talkover, lock

COUPLING:

VIDEO: YC, CV and XGA: DC

AUDIO: AC, input and output

AUDIO THD + NOISE@1kHZ: Group: 0.08%; Speakers: 2% (max pwr); Master: 0.25%
AUDIO 2nd HARMONIC:

Group: 0.065%; Speakers: 1.6% (max pwr); Master: 0.155%

POWER SOURCE:

100-240VAC, 50/60Hz, 35VA

DIMENSIONS:

19-inch (W), 7-inch (D) 2U (H) rack-mountable

WEIGHT:

3.8 kg (8.4 lbs.) approx.

ACCESSORIES:

Power cord, infra-red remote control transmitter, PC control software,

Windows®-based Configuration Manager XPort software and Com Port

Redirector

1 Specifications are subject to change without notice

Summary of Contents for VP-23N













































Search results

Summary of Contents for VP-23N

Reviews:

Related manuals for VP-23N

Brands by name

Popular brands

Kramer VP-23N, User Manual

Search results

Summary of Contents for VP-23N

Reviews:

Related manuals for VP-23N

Brands by name

Popular brands