KRAMER: SIMPLE CREATIVE TECHNOLOGY
Acquiring EDID
10
7
Acquiring EDID
The
VM-4Hxl
initially operates with the default EDID. This means that you
can turn ON the power before connecting any of the acceptors or the source.
You can acquire the EDID by sending the:
•
EDID from a selected output to the input (see
Section 7
•
Default EDID to the input (see
)
Section 7.1.2
•
Auto
)
1
EDID to the input (see
Section 7.1.3
7.1.1 Acquiring the EDID from a Selected Output
)
To select an EDID from a selected output, do the following:
1. Press the SELECT button, as required, to reach the desired output, which
blinks.
2. Press the READ button.
The EDID of the selected output is stored in the non-volatile memory when
the READ button no longer illuminates as well as the selected output LED.
7.1.2 Restoring the Default EDID
To restore the default EDID, do the following:
1. Press the SELECT button several times until the OUTPUT LEDs blink
simultaneously.
2. Press the READ button.
The READ button illuminates.
The default EDID is stored in the non-volatile memory when the READ
button no longer illuminates as well as the output LEDs.
7.1.3 Acquiring the Auto EDID
To acquire the Auto EDID, do the following:
1. Press the SELECT button several times until the OUTPUT LEDs blink in
sequence.
2. Press the READ button.
The READ button illuminates.
The auto EDID is stored in the non-volatile memory when the READ
button no longer illuminates as well as the output LEDs.
1 The auto EDID is an adjusted calculation of the EDIDs of all the connected outputs