KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a VM-4Hxl 1:4 HDMI Distributor
8
6
Connecting a VM-4Hxl 1:4 HDMI Distributor
To connect the
VM-4Hxl
as a 1:4 HDMI distributor, do the following
1
1. Connect an HDMI source (for example, a DVD player) to the INPUT
connector.
:
2. Connect the four OUTPUT connectors
2
OUTPUT 1 connector to HDMI acceptor 1 (for example, an LCD
TV)
to up to four HDMI acceptors, as
follows:
OUTPUT 2 connector to HDMI acceptor 2 (for example, a
plasma display)
OUTPUT 3 connector to HDMI acceptor 3 (for example, a
plasma display)
OUTPUT 4 connector to HDMI acceptor 4 (for example, a
plasma display)
3. Connect the power cord to the mains electricity.
4. Turn ON the POWER.
5. Acquire EDID (see
Section 7
1 Switch OFF the power on each device before connecting it to your VM-4Hxl. After connecting your VM-4Hxl, switch on
its power and then switch on the power on each device
).
2 As required. Up to 4 outputs can be connected on the VM-4Hxl. Not all outputs need to be connected