Kramer Electronics Ltd.
VP-440
– Protocol 3000
49
FACTORY
Functions
Permission
Transparency
Set:
FACTORY
End User
-
Get:
-
-
-
Description
Syntax
Set:
Reset device to factory defaults configuration
#FACTORY
␍
Get:
-
-
Response
~
nn
@
FACTORY
␠
OK
␍␊
Notes
This command deletes all user data from the device. The deletion can take some time.
HDCP-MOD
Functions
Permission
Transparency
Set:
HDCP-MOD
Administrator
Public
Get:
HDCP-MOD?
End User
Public
Description
Syntax
Set:
Set HDCP mode
#HDCP-MOD
␠
P1,P2,P3
␍
Get:
Get HDCP mode
#HDCP-MOD?
␠
P1,P2
␍
Response
Set / Get: ~
nn
@
HDCP-MOD
␠
P1,P2,P3
␍␊
Parameters
P1 (Input/Output)
– 0=Input; 1=Output
P2 (Scaler number)
– Input 0-3=HDMI 1 – HDMI 4; Output 0-1=HDMI, HDBaseT
P3 (Status)
– Input: 0=Off; 1=On; Output: 2=Follow In, 3=Follow Out
Response triggers
Response is sent to the com port from which the
Set
(before execution)
/ Get
command was received
Response is sent to all com ports after execution if HDCP-MOD was set any other external control device
(button press, device menu and similar) or genlock status changed
Notes
Set HDCP working mode
on device input
:
HDCP supported
– HDCP_ON [default]
HDCP not supported
– HDCP OFF
HDCP support changes following detected sink
– MIRROR OUTPUT
HELP
Functions
Permission
Transparency
Set:
-
-
-
Get:
HELP
End User
-
Description
Syntax
Set:
-
-
Get:
Get command list or help for specific command
2 options:
1. #
HELP
␍
2. #
HELP
␠
command_name
␍
