6
VM-2UX - Connecting the VM-2UX
4
Connecting the VM-2UX
Always switch off the power to each device before connecting it to
your
VM-2UX
. After connecting your
VM-2UX
, connect its power and
then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
1. Connect a 12G SDI video source (for example, a 12G SDI camera) to the
INPUT BNC connector.
2. Connect up to two video OUT BNC connectors to the appropriate HD-SDI
video acceptors (for example, 12G SDI displays).
You do not have to connect both outputs.
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
).
Figure 2: Connecting to the VM-2UX
Summary of Contents for VM-2UX
Page 1: ...USER MANUAL MODEL VM 2UX 12G SDI 1 2 DA P N 2900 300711 Rev 3 www KramerAV com...
Page 2: ......
Page 3: ......
Page 12: ......