Step 4: Connect power
Connect the power cord to
VM-22H
and plug it into the mains electricity.
Safety Instructions (See
for updated safety information)
Caution:
•
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the
terminal or in the User Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.
Step 5: Operate the VM-22H
1. Press the EDID SETUP button to cycle through the EDID sources in the following order:
a. Output 1 (Out 1 LED lights)
b. Output 2 (Out 2 LED lights)
c.
Default EDID (Out 1 and 2 LEDs flash)
d. Auto-Mix EDID (Out 1 and 2 LEDs light)
2. To store the EDID, release the button and the EDID is acquired.
