KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-28HDMI / VM-212HDMI / VM-216HDMI
12
5.2 Operating the VM-28HDMI / VM-212HDMI / VM-216HDMI
1. Turn ON the POWER.
2. Select the desired input.
3. Press the EDID button to acquire or change the EDID data (see section 5.2.1).
5.2.1
Using the EDID Button
Initially, the
VM-28HDMI
/
VM-212HDMI
/
VM-216HDMI
operates with
the factory default EDID.
5.2.2
Acquiring / Changing the EDID
You can work with the default EDID or acquire or change an EDID via one
of the connected outputs. Each input is assigned with its own (individual)
EDID block. Use the EDID button to acquire the output EDID information.
To acquire or change the EDID of a new output display:
1. Connect the power supply.
2. Connect the new output display device.
3. Press the EDID button for more than 3 seconds to set the machine to the
EDID Reset mode.
4. Press an input button (either IN 1 or IN 2)
1
once.
The selected input button illuminates.
5. Press that input button to set the appropriate OUTPUT STATUS LED.
The OUTPUT STATUS LED blinks indicating that that output channel is
selected.
6. Press the LOCK button to copy the EDID of the selected OUTPUT to the
input.
Note: to cancel the EDID modification, press the EDID button before
pressing the LOCK button.
While the EDID is being copied the EDID button blinks. The new EDID
is copied, when the EDID button no longer blinks.
5.2.3
Resetting the Default EDID
To reset the default EDID, do the following:
Repeat the steps in section 5.2.2 while selecting an output to which no
device is connected
1 Depending if you want to copy the new EDID to input 1 or to input 2
