KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-114H 2 Input 1:4 HDMI DA
8
Figure 2: Connecting the VM-114H 2 Input 1:4 HDMI DA
5.2 Selecting an Active Input
To select an active input:
•
Press the INPUT SELECTOR button until the required INPUT LED lights
5.3 Acquiring the EDID
Each input on the
VM-114H
has a factory default EDID loaded
1
8
(see
Section
).
This lets you connect the power before having to connect one of the acceptors.
You can acquire the EDID
2
•
One output (the relevant output LED flashes)
from:
•
The default EDID (all output LEDs flash)
•
Up to four connected outputs using the Auto-mix Mode
1
1 The VM-114H reads the EDID which is stored in the non-volatile memory
(all output LEDs light)
2 This is usually done only once when the machine is being set up in an installation Once acquired, the EDID is saved in non-volatile
memory and further acquisition is not necessary
