Using Your VM-20FW FireWire Distributor/Hub
7
5.4 Operating the VM-20FW FireWire Distributor/Hub
To distribute the signal from:
PORT A (that is, from the PC
1
), push in the PORT SELECT button
The signal from the PC transmits to all the FireWire devices which are
connected and powered on
PORT B (that is, from the Laptop
1
), release the PORT SELECT button
The signal from the Laptop transmits to all the FireWire devices which are
connected and powered on
5.5 Operating the VM-20FW as Four 1:4 Distributors
After powering on the
VM-20FW
, the signal from each Group automatically
distributes to the respective four acceptors, as follows:
Source A at port 1 distributes to acceptors A1, A2, A3, and A4 at ports 2,
3, 4, and 5
Source B at port 6 distributes to acceptors B1, B2, B3, and B4 at ports 7, 8,
9, and 10
Source C at port 11 distributes to acceptors C1, C2, C3, and C4 at ports 12,
13, 14, and 15
Source D at port 16 distributes to acceptors D1, D2, D3, and D4 at ports
17, 18, 19, and 20
1 In the example in Figure 2
